TRE
Audi R8 4S Facelift Pre-Preg Carbon Fibre Front Splitter by TRE
Audi R8 4S Facelift Pre-Preg Carbon Fibre Front Splitter by TRE
Shipped Worldwide
Fitted With Precision
Ready To Ship
Couldn't load pickup availability
Please contact us for a quote on shipping if your area is not available for checkout.
Enhance the aesthetics and aerodynamics of your Audi R8 4S Facelift with this meticulously crafted TRE Carbon Fibre Front Splitter.
Why Choose the TRE Carbon Front Splitter for AUDI R8 4S Facelift?
- Address the Gap: Eliminate the unsightly gap left by the stock Audi R8 4S Facelift bumper for a lower, sleeker profile.
- Sophisticated Aggression: Enhance the aesthetics of your R8 with a touch of motorsport-inspired design.
- Lightweight Strength: Crafted from high-quality, 2x2 weave pre-preg carbon fiber for exceptional strength without added weight.
- Potential Performance Gains: The design may improve downforce at higher speeds, enhancing handling and stability.
- Flawless Fitment: TRE's renowned precision guarantees a seamless integration with your Audi R8 4S Facelift.
What's in the box
- 1 x TRE Carbon Fibre (pre-preg, 2x2 Weave) Front Splitter
How to install
1. Preparation
-
Park the car on a flat surface and lift the front end slightly with ramps or a jack/stands (for clearance).
-
Gather tools: trim removal tools, socket set, screwdriver, drill with self-tapping screw bit, and masking tape (optional to protect paint).
2. Remove the OEM Gloss Black Lip
-
Locate the OEM fasteners underneath the front lip.
-
Carefully unscrew or unclip them.
-
Gently pull the OEM gloss black lip away from the bumper — use trim tools to avoid scratching paint.
3. Test Fit the TRE Front Splitter
-
Position the TRE splitter in place of the OEM lip.
-
Ensure it aligns with the bumper edges and sits flush.
-
Make adjustments until the fitment is perfect. Use masking tape temporarily to hold it in position if needed.
4. Secure with Self-Tapping Screws
-
Starting from the center, drill in self-tapping screws through the splitter into the bumper underside.
-
Work outward toward the edges, securing screws evenly to maintain alignment.
-
Double-check spacing so the splitter is mounted symmetrically.
5. Final Checks
-
Confirm all screws are tight but not over-torqued (to avoid stripping).
-
Inspect splitter alignment from the front and sides.
-
Lower the vehicle and check clearance with the ground.
WATCH OUR VIDEO ON THE TRE AUDI R8 BODYKIT HERE:
TRE
TRE ("T-R-E") products represent the pinnacle of the range. Each product is built to the very highest standards and are covered by an industry leading two year warranty. The sole aim of each part in this range is to push boundaries and bring you closer to The Racers Edge.
The pre-preg (dry) manufacturing method used in TRE carbon fibre parts is lighter, stronger and more premium than those found in it's range.